iConnectAccess624W
57
To Define IP QoS Traffic Rules:
The IP QoS page appears when you click the Add button in the QoS Setup screen.
When setting rules, each rule is a matching criterion that identifies the application traffic
to be transmitted by the iConnectAccess624W using one of the three priority queues –
High, Medium or Low.
From the IP QoS screen,
step 1
Click Add to define the IP QoS traffic rules. The following screen appears:
step 2
Enter a rule name in the Rule Name field.
step 3
Identify the traffic by source and destination addressing, source/destination
port number, protocol and/or physical port.
step 4
Select the protocol from the Protocol drop-down list. The options are: TCP,
UDP, ICMP or ANY.
step 5
Select the priority queue in which the identified traffic will be placed, from the
Traffic Priority drop-down list. The options are: Low, Medium, or High.
step 6
If you wish to set the TOS bit, select it from the TOS Marking list.
step 7
Click Apply,
then
Tools. The following screen appears:
step 8
Click
System Commands, then Save All. Click OK to confirm the save
when the following appears:
