iConnectAccess624W
74
step 10
Click Add.
step 11
Click Apply, then Tools. The following appears:
step 12
Click
System Commands, then Save All. Click OK to confirm the save
when the following appears:
NOTE:
A maximum of 20 MAC Filter Rules can be defined and saved.
To Edit An Existing Filter Rule:
From the Bridge Filters screen, highlight the Edit radio button for the
rule to be edited, from the list of existing filter rules.
The rule appears in the Enable Bridge Filters area of the screen.
Make the required change / s to the MAC Address,
Protocol and
Mode types, and click Apply, Tools, then System Commands. Click
the Save All button, and confirm the save by clicking OK when the
confirmation message appears.
To Delete Filter Rule(s):
Check the
Delete checkbox beside the filter rule / s to be deleted.
NOTE:
Multiple deletions are possible by using the <Shift> key and clicking the
Delete checkboxes. The Select All checkbox can be used to delete all
filter rules quickly.
Click Apply, Tools, then System Commands..
Click the Save All button, and confirm the save by clicking OK when
the confirmation message appears.
