iConnectAccess624W
50
SNTP
Simple Time Network Protocol ensures that computer clock times can be synchronised in
a network of computers to the millisecond.
To Configure SNTP:
From any screen in the web interface,
step 1
Click the Advanced tab, then SNTP. The following screen appears:
step 2
Click the Enable SNTP checkbox.
step 3
Enter the primary SNTP Server address as required in the Primary SNTP
Server field.
step 4
Repeat this step for the Secondary and Tertiary SNTP Server addresses as
required.
step 5
Enter a timeout limit (in seconds) in the Timeout field.
step 6
Enter a Polling Interval limit (in minutes) in the Polling Interval field.
step 7
Enter the number of times to retry connecting to the server in the Retry
Count field.
step 8
From
the
Time Zone drop-down list, select the time zone in which the router
is operating.
step 9
Check
the
Day Light checkbox to activate daylight savings time.
step 9
Click Apply,
then
Tools. The following screen appears:
