iConnectAccess624W
41
The following table lists the Bridged Connection Setup screen fields and their definitions:
Field Description
LLC and VC are two different methods of encapsulating multiple sessions. This
is set to LLC by default.
LLC
With LLC encapsulation, a link control header is added to the Ethernet
packet that identifies the protocol type (Ethernet). This allows multiple
protocols to be transmitted over the ATM Virtual Circuit.
Encapsulation
VC
With VC Multiplexing, no link control header is needed as the ATM
Virtual Circuit is assumed to be carrying a single protocol.
Select LAN
Select the LAN Group (as defined in the LAN Configuration screen) of which the
bridge connection will be part.
VPI
The VPI (Virtual Path Identifier) defines the virtual path settings for the ADSL
connection between you and your ISP. The VPI value entered here must be
supported by your ISP.
VCI
The VCI (Virtual Channel Identifier) defines the virtual channel settings for the
ADSL connection between you and your ISP. The VCI value entered here must
be supported by your ISP.
QoS
Defines QoS at the ATM layer. Three different Quality Of Service options are
available in the iConnectAccess624W: UBR, CBR and VBR. The QoS selected
here must be supported by your ISP. By default this is set to UBR.
