iConnectAccess624W
60
step 6
Click Apply,
then
Tools. The following screen appears:
step 7
Click
System Commands, then Save All. Click OK to confirm the save
when the following appears:
The following table lists the Port Forward screen fields and their definitions:
Field Description
WAN Connection
Select a defined WAN connection.
Allow Incoming Ping
Ping is a protocol used mainly for monitoring the connectivity between
IP devices. Enabling this feature allows remote devices to use Ping to
check connectivity to your device. You may need to enable this for
monitoring purposes. This is set to Disabled by default for standard
operation.
Select LAN Group
Select the LAN Group of which the computer the port to be forwarded
is a member. LAN Groups can be managed under Setup > LAN
Configuration.
LAN IP
This is the IP address to which the selected Ports are forwarded. It is
recommended that you use a static IP address. You will need to
define this in the LAN Clients screen.
New IP
Shortcut to the LAN Client page. Static addresses not listed under
LAN IP drop-down list can be added here.
Custom Port Forwarding Link to Custom Port Forwarding screen.
DMZ
Link to the DMZ screen.
Category/Available
Rules
A number of pre-defined categories and rules are available here.
E.g.: Web servers specifies the following port forwarding profile:
