iConnectAccess624W
17
LAN Set Up
By default, your iConnectAccess624W has the DHCP server (LAN side) enabled. If you
already have a DHCP server running on your network, you must disable one of them; if
you connect a second DHCP server into the network, you will experience network errors
and the network will not function normally.
Accessing The LAN Configuration Screen
Before configuring the IP settings for your LAN, you will need to select the Ethernet
interface type to set up in the LAN Configuration screen.
To do this, from any web interface screen:
step 1
Click Setup, then LAN Configuration. The following screen appears:
step 2
Click
Configure. The following screen appears.
step 3
Ensure the Use the following Static IP address radio button is highlighted,
and in the area beneath this field, enter a different IP Address in the IP
Address field if required.
