iConnectAccess624W
64
Custom Port Forwarding
You will only need to use Custom Port Forwarding when specifying IP Subnets or IP
Addresses not listed under LAN Clients. Otherwise custom rules can be defined in the
User Category of the Available Rules, and then mapped to the appropriate WAN
connection and LAN IP.
step 1
From the Port Forwarding screen, click Custom Port Forwarding to define
Port Forwarding rules. The following screen appears:
step 2
From the Connection: drop-down list, select the connection name for which
you wish to configure port forwarding.
step 3
Enter a unique name for the rule in the Application field.
step 4
Identify the traffic by source and destination address and ports.
Use the IP Address 0.0.0.0 with a netmask of 0.0.0.0 in the Source Address
if your IP Address is dynamically-assigned.
step 5
Select the protocol from the Protocol drop-down list. The options are: TCP,
UDP, ICMP or ANY.
step 6
Enter the destination IP Address and Netmask of the server to which the
traffic is being forwarded.
step 7
Enter the destination port on which the server will respond, in the
Destination Port Map field.
step 8
Click Apply,
then
Tools. The following screen appears:
