Open iConnectAccess624W Technical Reference/Users Manual Download Page 24

Page: 24 / 120

iConnectAccess624W

Ethernet Switch

This screen is used to hard set the Ethernet Speed and duplexing options. It is
recommended that that all ports be set to auto.

To Modify the Ethernet Switch Configuration

From any screen in the web interface,

step 1

Click the Setup tab, then Ethernet Switch. The following screen appears:

step 2

From the Physical Port1 drop-down list, select the ethernet port for which
you wish to change the hardware setting. The options are: Auto, 10\Half
Duplex, 10\Full Duplex, 100\Half Duplex and 100\Full Duplex.

step 3

Edit each Ethernet port as required.

step 4

Click Apply,

then

Tools. The following screen appears:

step 6

Click System Commands, then Save All. Click OK to confirm the save
when the following appears:

Summary of Contents for iConnectAccess624W

























































































































Search results

Summary of Contents for iConnectAccess624W

Reviews:

Related manuals for iConnectAccess624W

Brands by name

Popular brands

Open iConnectAccess624W, Technical Reference/Users Manual

Search results

Summary of Contents for iConnectAccess624W

Reviews:

Related manuals for iConnectAccess624W

Brands by name

Popular brands