Open iConnectAccess624W Technical Reference/Users Manual Download Page 9

Page: 9 / 120

iConnectAccess624W

Restore To Factory Defaults

The Restore To Factory Defaults feature will reset the iConnectAccess624W to its factory
default configuration.

To Restore Factory Defaults to The iConnectAccess624W:

Ensure that the iConnectAccess624W has been powered on for a minimum of 10
seconds.

Use a blunt implement, such as a pencil or paperclip to press the reset

button for 10 seconds, then release it.

NOTE:

During this time the reset is in progress. Do NOT power the
iConnectAccess624W off whilst it resets.

The iConnectAccess624W will be reset to its factory defaults and once the indicator lights
have returned to green (non-blinking), the reset is complete.

Summary of Contents for iConnectAccess624W

























































































































Search results

Summary of Contents for iConnectAccess624W

Reviews:

Related manuals for iConnectAccess624W

Brands by name

Popular brands

Open iConnectAccess624W, Technical Reference/Users Manual

Search results

Summary of Contents for iConnectAccess624W

Reviews:

Related manuals for iConnectAccess624W

Brands by name

Popular brands