iConnectAccess624W
44
Modify An Existing Connection
To Modify An Existing Connection:
From any screen in the web interface,
Click the Setup tab, then click the connection you wish to modify.
Edit as applicable and click Apply, Tools, then System Commands. Finally click the
Save All button, then OK when the confirmation message appears to make the changes
permanent. If you are deleting the entry, click Delete.
The following table lists the Connection Setup buttons and their definitions:
Field Description
Apply
Applies the changes made to the connection.
Delete
Deletes the connection.
Cancel
Cancels the changes made to the connection before applying.
