iConnectAccess624W
81
The following table lists the Dynamic Routing screen fields and their definitions:
Field Description
Enable RIP
This enables RIP routing on the iConnectAccess624W router.
Protocol
There are two versions of RIP. RIP version 1 (v1) is defined in RFC
1058. RIP version 2 (v2) is defined in RFC 1723. Select between RIPv1,
RIPv2 and RIPv1 compatible.
The protocol is dependent upon the entire network. Most networks
support RIP v1. If RIP v1 is selected, routing data will be sent in RIP v1
format. If RIP V2 is selected, routing data will be sent in RIP v2 format
using subnet broadcasting. If RIP V1-Compatible is selected, routing
data will be sent in RIP v2 format using multicasting.
Direction
The direction determines the means through which RIP routes will be
updated.
Selecting In means that the iConnectAccess624W will only incorporate
received RIP information. Selecting
Out
means that the
iConnectAccess624W will only send out RIP information.
Selecting Both means that the iConnectAccess624W will incorporate
received RIP information and send out updated RIP information.
Enable Password
Simple password authentication for RIPv2 was defined in RFC 1723. If
you intend to use password authentication you must enable your
password here.
Password
Type the RIPv2 authentication password here. Ensure that all routers are
configured with this password for RIPv2 to work.
