iConnectAccess624W
20
The following table lists the Enable DHCP Server area of the LAN Group 1 Configuration
screen fields and their definitions:
Field Description
Unmanaged
Highlight this radio button if this LAN group does not require a management IP
address.
Obtain an IP address
automatically
Check this checkbox if another DHCP server is providing addressing for the
iConnectAccess624W.
IP
Address
This field will be populated when the iConnectAccess624W
receives an IP Address from a DHCP Server.
Netmask
This field will be populated when the iConnectAccess624W
receives an IP Address from a DHCP Server.
PPP IP Address
Check this checkbox if PPP is providing addressing.
Use the following Static IP
Address
Highlight this radio button to use a static address for your router. This is the default
setting.
IP
Address
Enter a static IP address, the Default IP Address for the
iConnectAccess624W is
192.168.1.254
..
Netmask
Enter static the subnet mask; the Default Netmask for the
iConnectAccess624W is
255.255.255.0
.
Default
Gateway
Enter the default gateway if specified by your ISP.
Otherwise leave this field blank and it will be automatically
populated when an ISP connection is made.
Hostname
This is the assigned hostname for the
iConnectAccess624W. The Hostname can be any
alphanumeric word that does not contain spaces. The
default hostname is R624.
Domain
The Domain Name is used in conjunction with the
Hostname to uniquely identify the iConnectAccess624W.
Static Options
Enable DHCP Server
Highlighting the Enable DHCP Server radio button turns
on the DHCP server. This will need to be disabled if a
DHCP server is already running on the LAN. The DHCP
Server is set to on by default.
Start
IP
This address is the beginning of the range from which the
DHCP Server starts issuing IP addresses. You need to
ensure the iConnectAccess624W Management IP address
and any statically-defined addresses are not within the
DHCP start and end address ranges. The default Start IP
address is
192.168.1.100
.
End
IP
This is the end of the DHCP Server IP address range.
The default End IP is
192.168.1.200
Lease
Time
The Lease Time is the amount of time a LAN computer will
hold the IP address. The client will automatically renew
the address after this time has elapsed. If the LAN
computer does not renew the address after the lease
period the lease information will be removed from the
DHCP database. This database can be viewed under
Tools> DHCP Clients. The lease time is in units of
seconds; the default value is
604800
seconds (7 days).
Enable DHCP Relay
Highlighting the Enable DHCP Relay radio button
configures the iConnectAccess624W to forward the DHCP
request to a remote DHCP server. Enter the remote
DHCP server address in the Relay IP field.
Server and Relay Off
This will disable the iConnectAccess624W’s DHCP server
and relay functionality.
Management IP
