iConnectAccess624W
103
System Commands
To make changes permanent on the web interface you need to click the Tools tab and
select System Commands
from the menu list. The following commands are used to
configure the iConnectAccess624W:
The following table lists the System Commands screen buttons and their definitions:
Field Description
Save All
Click this button to save the current configuration of the iConnectAccess624W
permanently. If you do restart the system without saving your configuration,
the iConnectAccess624W will revert back to the previously saved
configuration.
Restart
Click this button to re-start the system. If you have not saved your
configurations, the iConnectAccess624W will revert back to the previously
saved configuration upon re-starting.
NOTE:
All connection information and configuration will be erased.
Also, connectivity will be briefly lost to the unit will be lost. You
can reconnect after the unit reboots.
Restart Access Point
Click this button to restart the Wireless Access Point. It is important to Restart
Access Point any time you change your Wireless settings.
Restore Defaults
Click this button to restore the factory default configuration.
NOTE:
All connection information and configuration will be erased.
Also, connectivity will be briefly lost to the unit will be lost. You
can reconnect after the unit reboots.
