iConnectAccess624W
65
step 9
Click
System Commands, then Save All. Click OK to confirm the save
when the following appears:
The following table lists the Custom Port Forwarding screen fields and their definitions:
Field Description
Connection
The name of the connection on which you wish to customise Port
Forwarding.
Enable
Check this checkbox to enable the customisation.
Application
Enter a unique name for the rule in this field.
Protocol
Select the protocol for your traffic. The options are: TCP, UDP, ICMP or
ANY
.
Source IP
The IP address of the interface forwarding the traffic or 0.0.0.0 if the
address is dynamically-assigned.
Source Netmask
The Network Mask of the interface forwarding the traffic or 0.0.0.0 if the
address is dynamically assigned.
Destination IP
The IP address of the device that is receiving the traffic.
Destination Netmask
The Network Mask of the device that is receiving the traffic.
Destination Start Port
Destination End Port
The destination port number or port range that is to be translated.
Destination Port Map
The destination port number to which traffic is translated.
