iConnectAccess624W
58
The following table lists the IP QoS Traffic Rule screen fields and their definitions:
Field Description
Rule Name
This lists the connection names that are configured in the
iConnectAccess624W.
Source IP
The IP address of the device that is the sending the information.
Source Netmask
The Network Mask of the device that is sending the information.
Source Start Port /Source
End Port
The port number/port range of device that is sending the information on.
The port range must be between 1 – 65535.
Destination IP
The IP address of the device that is the receiving the information.
Destination Netmask
The Network Mask of the device that is receiving the information.
Destination Start Port
Destination End Port
Use this field to classify QoS traffic by the destination port. A range can
be entered for a serial on continuous ports.
Protocol
Select the protocol for your traffic. The options are: TCP, UDP, ICMP or
ANY
.
Traffic Priority
This is the priority for the source traffic. The options are: Low
,
Medium
or High for the selected traffic.
Physical Port
Select only if traffic on this port is to be prioritised.
Normal Service
TOS Marking
The additional TOS marking field allows you to assign a Type Of Service
(TOS) value to this traffic. The values for the TOS marking are
:
No
Change, Normal Service, Minimise Monetary Cost, Maximise Reliability,
Maximise Throughput and Minimise Delay.
