iConnectAccess624W
11
Before You Begin
Configuring Your Ethernet Network Card
Before you can use your iConnectAccess624W, you may need to configure the Ethernet
ports on the modem.
Configuring Your Ethernet Network Card
For Windows
®
98 Second Edition / Windows
®
Me
NOTE:
Please note that these instructions may vary, depending on whether this is
the first time you are configuring your Ethernet Driver in Windows. Those
below are for first time configurations.
step 1
From your Windows desktop, click Start > Settings > Control Panel
.
step 2
From the Control Panel window, double-click the Network icon.
step 3
From the Network screen, highlight the Configuration tab to make it active.
step 4
From the The following network components are installed area of the
window, select TCP/IP-> xxx where xxx refers to the model of the Ethernet
card connected to your ADSL Modem, and click Properties.
step 5
From the TCP/IP Properties screen, click the IP Address tab to make it
active.
step 6
Highlight the Obtain an IP Address Automatically radio button, and click OK
to save the settings.
step 7
Ensure that the iConnectAccess624W is powered on. Restart your system
when prompted.
