iConnectAccess624W
56
step 3
Select a percentage from the Low priority weight drop-down list.
step 4
Select a percentage from the Medium priority weight drop-down list.
step 5
If you wish to enable IP QoS, check the Enable IPQoS checkbox.
step 6
If you wish to enable trusted mode, check the Trusted Mode checkbox.
step 7
Click Apply,
then
Tools. The following screen appears:
step 8
Click
System Commands, then Save All. Click OK to confirm the save
when the following appears:
The following table lists the IP QoS screen fields and their definitions:
Field Description
Choose a
Connection
This lists the connection names that are configured on the
iConnectAccess624W. Select a WAN or LAN connection here.
Low Priority Weight /
Medium Priority
Weight
These two fields allow you to select the weights of the Medium and Low Priority
queues in increments of 10 percent, so that the sum of the weights is 100
percent.
Enable IP QoS
Check /uncheck this checkbox to enable / disable IP QoS for the selected
connection.
Trusted Mode
The iConnectAccess624W has two primary modes of operation: Trusted and
Untrusted.
Trusted: In Trusted mode, all the rules will be applied first, regardless of the
Type Of Service (TOS) bit setting. (After the rules have been exhausted, the
existing TOS bit settings will be honoured.)
Untrusted: Untrusted Mode matches first against all rules, as in Trusted Mode.
If there is no match, then a default rule will be used. The queuing priority of the
default rule is Low.
