iConnectAccess624W
86
step 9
Click the Restart Access Point link to ensure all changes take effect.
The following table lists the Setup screen fields and their definitions:
Field Description
Enable AP
Check this checkbox to activate the access point. Disabling the AP
will disable the wireless functionality. Only do this if you have no
wireless clients. The default setting is Enabled.
SSID
The SSID is a unique name shared among all points in your
wireless network. The default name is wlan-ap-624w. All network
devices must share the same SSID in order to communicate
successfully.
Hidden SSID
For additional security, check the Hidden SSID checkbox to hide
the Service Set Identifier.
Channel B/G
Select the transmission range for the access point.
Mixed
802.11b supported rate and 802.11g supported rate.
b only
802.11b supported rate only
b +
802.11b supported rate and 22 Mbps PBCC rate.
11g only
802.11g supported rate only.
b / g Mode
The default is Mixed Mode.
4X
Reserved for proprietary clients.
User Isolation
Reserved for proprietary clients.
