iConnectAccess624W
22
step 10
Click System Commands, then Save All. Click OK to confirm the save
when the following appears:
NOTE:
The Domain Name is used in conjunction with the
Hostname
to identify the
iConnectAccess624W uniquely. To access the iConnectAccess624W’s web
pages you can type the IP
192.168.1.254
or
mygateway.ar7
in the web
browser. Using the Hostname in the browser requires the workstation to have its
DNS server set to the iConnectAccess624W.
The following table lists the fields and definitions of the Use The Following Static IP
Address area of the LAN Group 1 Configuration screen:
Field Description
IP Address
The Default IP Address for the iConnectAccess624W is
192.168.1.254
. Its
Subnet Mask is
255.255.255.0
, and this allows you to support 254. If you
wish to support a larger number of devices, you can alter the Subnet Mask.
However, if you do, remember the DHCP Server is defaulted to give out 101 IP
Addresses.
Netmask
A mask used to determine the subnet to which an IP address belongs. This is
the Subnet Mask that will be assigned to the Management interface of the
iConnectAccess624W.
Default Gateway
The default gateway is a host to which local computers send data that is
destined for a non-local machine. On the iConnectAccess624W, configure the
default gateway address here to reach all computers that are not on the same
local IP subnet.
The default gateway is the default route for all traffic that does not have a
defined route. This field is automatically populated when a PPP session is
established. Leave this field blank unless instructed otherwise by your ISP.
Hostname
This is the assigned hostname for the iConnectAccess624W. The Hostname
can be any alphanumeric word that does not contain spaces. The Default value
is mygateway1.
