iConnectAccess624W
12
For Windows
®
2000 / Windows
®
XP
NOTE:
Please note that these instructions may vary, depending on whether this is
the first time you are configuring your Ethernet Driver in Windows. Those
below are for first-time configurations.
Windows® 2000:
step 1
From your Windows desktop, click Start > Control Panel.
step 2
From the Control Panel window, double-click the Network Connections icon.
step 3
From the Network Connections window, right-click on the Local Area
Connection icon and select Properties.
step 4
Proceed from step 4 in the Windows XP Ethernet Driver Configuration
Procedure below.
Windows® XP:
NOTE:
Instructions are based on the default Start menu option.
step 1
From your Windows desktop, click Start > Control Panel.
step 2
From the Control Panel window, double-click the Network Connections icon.
step 3
From the Network Connections window, right-click on the Local Area
Connection icon that reflects the model of the Ethernet Card connected to
your iConnectAccess624W, and click Properties.
step 4
Ensure that the Connect Using field indicates the model of the Ethernet Card
connected to your iConnectAccess624W.
NOTE:
This is important especially if you have more than one Local Area
Connection icon displayed in the Network Connections window. Ensure that
you have selected the correct one.
step 5
From the This connection uses the following items: area of the Properties
window, select Internet Protocol (TCP/IP) and click Properties.
step 6
From the General tab of the Internet Protocol (TCP/IP) Properties window,
highlight the Obtain an IP Address Automatically radio button, and click OK.
step 7
Click OK again to close the dialog.
step 8
Ensure that your iConnectAccess624W is powered on. Restart your system
when prompted.
