iConnectAccess624W
42
Classical IP Over ATM (CLIP) Connection
Classical IP over ATM (CLIP), (defined in RFC1577) provides the ability to transmit IP
packets over an ATM network, CLIP support will encapsulate IP in an AAL5 packet data
unit (PDU) frame using RFC1577and it utilizes an ATM aware version of the ARP
protocol.
To Configure CLIP Connection:
NOTE:
If you need to use the VPI and VCI values in an existing connection, you
will need to open it and edit the setting. It is not possible to have more
than one connection using the same VPI/VCI values.
From any screen in the web interface,
step 1
Click the Setup tab, then New Connection.
step 2
From the Type drop-down list, select CLIP. The following screen is
displayed:
step 3
Enter a unique name for the CLIP connection in the Name field. The name
must not have spaces and cannot begin with numbers.
step 4
Leave the NAT and Firewall options as the default settings.
step 5
Enter
the
CLIP Settings, including IP Address, Mask and Default Gateway
as provided by your ISP.
step 6
Leave
the
ARP Server address as the default, unless advised by your ISP.
step 7
Enter the VPI and VCI settings as provided by your ISP.
step 8
Click Apply,
then
Tools. The following screen appears:
