iConnectAccess624W
21
The Management IP area of the web interface allows you to configure the LAN IP
Address details for the iConnectAccess624W. This is accessed through the LAN Group
1 Configuration screen.
NOTE:
If you change this address from the default, you will need to reconnect
using your new IP Address.
To Change The iConnectAccess624W IP Address:
From any screen in the web interface,
step 1
Click the Setup tab, then LAN Configuration.
step 2
From the LAN Configuration screen, click the Configure link beside the
required LAN Group interface (i.e. LAN group 1). The following screen
appears:
step 3
Under
IP Settings, highlight the Use the following Static IP address radio
button.
step 4
Enter the IP Address in the IP Address field as required.
step 5
Enter the netmask in the Netmask field as required.
step 6
The default gateway is automatically received from the ISP when a
connection is made. Leave this field blank unless instructed otherwise by
your ISP.
step 7
Enter an alphanumeric Hostname in the Hostname field.
step 8
Enter the Domain Name in the Domain Name field. This cannot contain
spaces.
step 9
Click Apply
,
then Tools. The following appears:
