![background image](http://html1.mh-extra.com/html/omron/srm1-programing-02-2001/srm1-programing-02-2001_programming-manual_742414093.webp)
2-2
Section
CPM2A/CPM2C High-speed Counters
72
Note
The following examples are for Fujitsu-compatible connectors. Input bit ad-
dresses and connector pin numbers depend on the models. Refer to the
CPM2C
Operation Manual
(W356) or the
CPM2C-S Operation Manual
(W377) for de-
tails.
00006: Input interrupt (counter mode) 3
00004: Input interrupt (counter mode) 1
00003: Input interrupt (counter mode) 0
00005: Input interrupt (counter mode) 2
00004: Input interrupt (counter mode) 1
00003: Input interrupt (counter mode) 0
Input terminals
Input connector
Note
Inputs 00006 and 00005 cannot
be used with CPU Units that
have only 10 I/O points.
(See above note.)
The following table shows the settings in the PC Setup area related to interrupt
input usage.
Word
Bits
Function
Setting
DM 6628
00 to 03
Interrupt setting for
input 00003
0: Normal input
1: Interrupt input
1
04 to 07
Interrupt setting for
input 00004
1: Interrupt input
(interrupt input mode or
counter mode)
08 to 11
Interrupt setting for
input 00005*
counter mode)
2: Quick-response input
12 to 15
Interrupt setting for
input 00006*
Note
*Input number 00005 and 00006 cannot be used in CPM2C CPU Units with 10
I/O points and in CPM2C-S CPU Units.
The setting will go into effect when the mode is changed (from PROGRAM to
MONITOR/RUN) or when the power supply is turned ON to the CPM2A/
CPM2C.
PC Setup