4-5
Section
Host Link Commands
301
Response Format
An end code of 00 indicates normal completion.
@
T
S
x 10
0
x 10
1
↵
Node no.
Header
code
Characters
122 characters max.
Terminator
FCS
Parameters
Characters (Command, Response)
For the command, this setting specifies any characters other than the carriage
return (CHR$(13)). For the response, the same characters as specified by the
command will be returned unaltered if the test is successful.
4-5-28 PROGRAM READ – RP
Reads the contents of the PC user’s program area in machine language (object
code). The contents are read as a block, from the beginning to the end.
Command Format
@
R
P
x 10
0
x 10
1
↵
Node no.
Header
code
Terminator
FCS
Response Format
An end code of 00 indicates normal completion.
@
R
P
x 10
0
x 10
1
x 16
1
x 16
0
↵
x 16
1
x 16
0
Node no.
Header
code
End code
1 byte
Program (for entire UM area)
Terminator
FCS
Parameters
Program (Response)
The program is read from the entire program area.
Note
To stop this operation in progress, execute the ABORT (XZ) command.
4-5-29 PROGRAM WRITE – WP
Writes to the PC user’s program area the machine language (object code) pro-
gram transmitted from the host computer. The contents are written as a block,
from the beginning.
Command Format
@
W
P
x 10
0
x 10
1
x 16
1
x 16
0
↵
Node no.
Header
code
1 byte
Program (Up to maximum memory size)
Terminator
FCS
Response Format
An end code of 00 indicates normal completion.
@
W
P
x 10
0
x 10
1
x 16
1
x 16
0
↵
Node no.
Header
code
End code
Terminator
FCS
Parameters
Program (Command)
Program data up to the maximum memory size.
