![background image](http://html1.mh-extra.com/html/omron/srm1-programing-02-2001/srm1-programing-02-2001_programming-manual_742414023.webp)
1
SECTION 1
PC Setup
This section explains the PC Setup in the CPM1, CPM1A, CPM2A, CPM2C (including the CPM2C-S), and SRM1(-V2) PCs.
The PC Setup can be used to control the operating parameters. To change the PC Setup, refer to the
Operation Manual
of the
PC for Programming Console procedures.
Refer to the
SSS Operation Manual: C-series PCs
for SSS procedures. Refer to the
SYSMAC-CPT Support Software Quick
Start Guide (W332)
and
User Manual (W333)
for SYSMAC-CPT Support Software procedures.
If you are not familiar with OMRON PCs or ladder diagram program, you can read
1-1 PC Setup
as an overview of the operat-
ing parameters available for the CPM1/CPM1A, CPM2A/CPM2C, and SRM1(-V2). You may then want to read
Section 5
Memory Areas
,
Section 6 Ladder-diagram Programming
, and related instructions in
Section 7 Instruction Set
before complet-
ing this section.
1-1
PC Setup
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1-1
Changing the PC Setup
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1-2
CPM1/CPM1A PC Setup Settings
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1-3
CPM2A/CPM2C PC Setup Settings
7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1-4
SRM1(-V2) PC Setup Settings
13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2
Basic PC Operation and I/O Processes
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2-1
Startup Mode
16
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2-2
Hold Bit Status
17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2-3
Program Memory Write-protection
17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2-4
RS-232C Port Servicing Time (CPM2A/CPM2C/SRM1(-V2) Only)
18
. . . . . . . . .
1-2-5
Peripheral Port Servicing Time
18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2-6
Cycle Monitor Time
18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2-7
Minimum Cycle Time
19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2-8
Input Time Constants
19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2-9
Error Log Settings
21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-3
CPM2C Changes in SW2
21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .