![background image](http://html1.mh-extra.com/html/omron/srm1-programing-02-2001/srm1-programing-02-2001_programming-manual_742414150.webp)
2-5
Section
CPM2A/CPM2C Pulse Output Functions
129
Wire the CPM2C to the motor driver as shown in the following illustration. In this
case, a CPU Unit with sinking transistor outputs is used.
Note
The following examples are for Fujitsu-compatible connectors. Output bit ad-
dresses and connector pin numbers depend on the models. Refer to the
CPM2C
Operation Manual
(W356) or the
CPM2C-S Operation Manual
(W377) for de-
tails.
Motor Driver
24 VDC
Output connector
(See above note.)
Note
Refer to the operation manual for details on wiring.
PC Setup
Sets the coordinate system for pulse output 0 as relative.
High-speed counter not used.
(Set for other than synchronized pulse control.)
DM 6629
0
15
0
DM 6642
0
0