![background image](http://html1.mh-extra.com/html/omron/srm1-programing-02-2001/srm1-programing-02-2001_programming-manual_742414148.webp)
2-5
Section
CPM2A/CPM2C Pulse Output Functions
127
Wiring
Wire the CPM2A to the motor driver as shown in the following illustration.
Motor Driver
Wire the CPM2C to the motor driver as shown in the following illustration. In this
case, a CPU Unit with sinking transistor outputs is used.
Note
The following examples are for Fujitsu-compatible connectors. Output bit ad-
dresses and connector pin numbers depend on the models. Refer to the
CPM2C
Operation Manual
(W356) or the
CPM2C-S Operation Manual
(W377) for de-
tails.
Motor Driver
24 VDC
Output connector
(See above note.)
Note
Refer to the operation manual for details on wiring.
PC Setup
Sets the coordinate system for pulse output 0 as relative.
High-speed counter not used.
(Set for other than synchronized pulse control.)
DM 6629
0
15
0
DM 6642
0
0