2-14
Section
Quick-response Inputs
156
Wire the CPM2C’s inputs as shown in the following diagram.
Note
The following examples are for Fujitsu-compatible connectors. Input bit ad-
dresses and connector pin numbers depend on the models. Refer to the
CPM2C
Operation Manual
(W356) or the
CPM2C-S Operation Manual
(W377) for de-
tails.
CPU Units with 10 I/O Points
Input connector
00003: Quick-response input 0
00004: Quick-response input 1
Input terminal
Input 00003: Quick-response input 0
Input 00004: Quick-response input 1
(See above note.)
CPU Units with 20/32 I/O Points
00006: Quick-response input 3*
00005: Quick-response input 2*
00003: Quick-response input 0
00004: Quick-response input 1
Input connector
(See above note.)
To use quick-response inputs with the CPM2A or CPM2C, make the following
settings in the System Setup Area (DM 6628) from a Programming Device.
Word
Bits
Function
Setting
DM 6628
00 to 03
Interrupt setting for
input number 3
0: Ordinary input
1: Interrupt input
2
04 to 07
Interrupt setting for
input number 4
1: Interrupt input
(interrupt input mode or
counter mode)
08 to 11
Interrupt setting for
input number 5*
counter mode)
2: Quick-response input
12 to 15
Interrupt setting for
input number 6*
PC Setup