Omron NT21 Series, Reference Manual

Page: 285 / 466

2-19 Section PT Configuration Settings
276
Number of Table Entries
Set the numbers of numeral memory tables, character string memory tables,
and bit memory tables here. For details on the numbers that can be set, refer to
2-3 Memory Tables (page 64).
Numeral Storage Type
Set whether the contents of words allocated to the following tables will be han-
dled as BCD data or binary data.
•
Values in words allocated to numeral memory tables
(The numeric value storage method set here is only valid when System is set
for Storage Type for each numeral memory table concerned. For details, refer
to
2-3-1 Numeral Memory Tables (page 64).)
•
Screen numbers in the word allocated to the PT status control area’s screen
switch setting
•
Memory table numbers in the words allocated to the PT status control area’s
copy source and copy destination memory tables
•
Memory table numbers in the words allocated to the PT status notify area’s up-
dated memory table
Downloaded from Elcodis.com electronic components distributor