![background image](http://html1.mh-extra.com/html/omron/nt21-series/nt21-series_reference-manual_744543148.webp)
2-9
Section
Character String Display
139
Magnification
NT31/NT31C
NT631/NT631C
1
1 (Equal)
Up to 40 characters
Up to 40 characters
1
2 (High)
Up to 40 characters
Up to 40 characters
2
1 (Wide)
Up to 20 characters
Up to 40 characters
2
2
Up to 20 characters
Up to 40 characters
3
3
Up to 13 characters
Up to 26 characters
4
4
Up to 10 characters
Up to 20 characters
8
8
Up to 5 characters
Up to 10 characters
If the character string display size exceeds the screen size with the specified
value, its display position is automatically changed so that the character string
is displayed within the screen.
In case the character string display can not be displayed within the screen
even if the Support Tool has changed its position, the error message will be
displayed.
•
The characters that can be displayed are alphanumerics, symbols and Marks.
Marks are displayed at the standard height even if Half Height is set as the Font
Type. Therefore, if normal alphanumerics and symbols are displayed after dis-
playing a mark, part of the mark will remain displayed, as shown in the figure
below.
•
If Half Height is set for Font Type, and a character string is written after display-
ing Marks, a part of the Marks will remain displayed, as shown below.
A B C D E
a b c d e f g h i j
In this case, create blank characters as marks, write these marks, and then
write the alphanumeric and symbol character string over them.
electronic components distributor
Summary of Contents for NT21 Series
Page 3: ...iv Downloaded from Elcodis com electronic components distributor...
Page 5: ...vi Downloaded from Elcodis com electronic components distributor...
Page 463: ...Downloaded from Elcodis com electronic components distributor...
Page 465: ...Downloaded from Elcodis com electronic components distributor...