manualshive.com logo in svg

Omron NT21 Series, Reference Manual

Share
Download
Omron NT21 Series Reference Manual Download Page 186

2-11

Section

Alarm List, Alarm History

177

•

When an entire alarm list or alarm history is displayed by screen switching

•

When a bit being monitored by the alarm list function changes status from
OFF to ON, and the corresponding message is displayed.

Messages already displayed are unaffected even if the contents of charac-
ter string memory tables change.

•

The message display areas for alarm lists/histories are touch switches. Do not
overlap them with other touch switches.

The relationship between the common properties of alarm lists and alarm histo-
ries and the display result are indicated below.

Properties

General

Position

Coordinates of the top left corner of the alarm list/history.

Size

Width and height of the alarm list/history (in dot units)
(But note that motion is in touch-switch-sized units only)

Message

Length

Maximum number of characters in the displayed message

NT31/NT31C: 1 to 39
NT631/NT631C: 1 to 40

For the alarm history function, the number of characters is
decreased by the number required to display the History
Info.
Restrictions also apply in accordance with the Scale
setting.

Display Line
Qty

Maximum number of displayed messages

NT31/NT31C: 1 to 12
NT631/NT631C: 1 to 24

Scale

Scale at which messages are displayed (Enlarged display,
page 141)

1

 

1 (Equal), 1

 

2 (High), 2

 

1 (Wide), 2

 

2, 3

 

3,

4

 

4, 8

 

8

Smoothing

Whether or not smoothing is used for characters with a
scale of 2

 

2 or larger (Smoothing, page 141)

Check mark (smoothing executed)/
No check mark (smoothing not executed)

Line Scroll Touch
Switches

Presence/absence of touch switches for scrolling
messages in line units

Check mark (touch switches present)/
No check mark (touch switches absent)

Page Scroll Touch
Switches

Presence/absence of touch switches for scrolling mes-
sages in page units

Check mark (touch switches present)/
No check mark (touch switches absent)

Common Attributes

Downloaded from 

Elcodis.com

 

electronic components distributor

 

Summary of Contents for NT21 Series



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands