manualshive.com logo in svg

Omron NT21 Series, Reference Manual

Share
Download
Omron NT21 Series Reference Manual Download Page 28

1-3

Section

System Configuration

19

System installer (made by OMRON)

The system installer is supplied as a standard accessory with the Support
Tool (NT-ZJCAT1-EV4).

Reference:

S

The following optional devices are available. All of them can be used either
with NT31 or NT31C.

Replacement backlight

NT31C-CFL01

Anti-reflective film (5 sheets)

NT30-KBA04

Chemical-resistant cover

NT30-KBA01

Replacement battery

C500-BAT08

S

The following optional devices are available. All of them can be used either with
NT631 or NT631C except for the replacement backlights.

Replacement backlight

NT631C-CFL01 (for the NT631C-ST151

j

)

NT631C-CFL02 (for the NT631C-ST141

j

)

Anti-reflective film (5 sheets)

NT610C-KBA04

Chemical-resistant cover

NT625-KBA01

Replacement battery

C500-BAT08

1-3-2 Connecting to the Host

The NT31/NT31C has the following two communication ports.

•

Serial port A:

D-SUB 9-pin connector

For RS-232C use only (The Support Tool and bar code readers can be con-
nected here.)

•

Serial port B:

D-SUB 25-pin connector

For RS-232C or RS-422A/485 (Selectable by memory switch)

(The Support Tool and bar code readers cannot be connected here.)

The host can be connected at either of these two ports.

The connection methods for each communication method at the PT and host
sides are indicated below. Make the settings in accordance with the communica-
tion method that can be used with the PC to be connected and the conditions at
the operation site.

Reference:

When using an RS-232C/422A convertor unit (NT-AL001) with the host link or
1:1 NT Link communication method, RS-485 cannot be used. The connection
must be made with RS-232C or RS-422A.

The NT631/NT631C has the following two communication ports. (Serial port B
has an RS-422A/485 terminal block as well as an RS-232C connector; use the
memory switch to select the serial communications method.)

•

Serial port A:
D-SUB 9-pin connector
For RS-232C use only (The Support Tool and bar code readers can be con-
nected here.)

•

Serial port B: Use the memory switch to select RS-232C or RS-422A/485.

Communications

Connection

Notes

RS-232C

D-SUB 9-pin connector

Cannot be used for Support Tool
or bar code reader.

RS-422A/485

Terminal block

---

NT31/NT31C

NT631/NT631C

Downloaded from 

Elcodis.com

 

electronic components distributor

 

Summary of Contents for NT21 Series



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands