429
Appendix B
Compatibility with Screen Data of Other PT
Models
The screen data of the NT31/NT31C and NT631/NT631C does not have complete downward compatibility with
earlier PT models. Consequently, when the data for an earlier PT model is converted for use in an NT31/NT31C or
NT631/NT631C, partial modification may be necessary.
The combinations for which data conversion is possible are shown below. Note that Ver.
j
indicates the direct
connection version. The NT-series Support Tool Ver. 4.1 for Windows is compatible with the latest version of each
PT model.
NT20S
(Ver. 5)
NT30
(Ver. 4)
NT30C
(Ver. 4)
NT31 (-V
j
)
NT31C (-V
j
)
NT600S
(Ver. 5)
NT610G, NT620S
(Ver. 4)
NT610C, NT620C, NT625C
(Ver. 4)
NT631 (-V
j
)
NT631C (-V
j
)
*
*
*
*
* The following downward screen data conversions are not possible:
-V2 models
→
-V1 models; -V1 models
→
models without a -V
j
suffix; or -V2 models
→
models without a -V
j
suffix.
The following upward screen data conversions are possible:
Models without a -V
j
suffix
→
-V1 models; models without a -V
j
suffix
→
-V2 models; or V1 models
→
V2 models.
However, data for models with no -V
j
suffix of NT20S-ST121 and NT600S-ST121/211, cannot be read with the
Support Tool (NT-ZJCAT1-EV4).
After data conversion, the following discrepancies may occur; in this case modify the data.
•
When the data of NT20S, NT600S, NT610G, or NT620S is converted, the position and size of touch switches
may change due to the difference in the dot size of touch switches.
•
Since the size and contents of the PT status control area and PT status notify area differ between the new models
(NT31, NT31C, NT631, NT631C) and earlier models, the program at the host (PC) must be modified.
The -V2 versions of the NT31, NT31C, NT631, and NT631C have been equipped with the NT30/620 compatible
mode that allows them to easily modify and reuse the screen data and user programs from earlier PTs. When a
NT31, NT31C, NT631, or NT631C PT is operating in NT30/620 compatible mode, its PT status control area and
PT status notify area are modified to be the same size as earlier PTs. Refer to
Appendix C for details (page 441).
electronic components distributor
Summary of Contents for NT21 Series
Page 3: ...iv Downloaded from Elcodis com electronic components distributor...
Page 5: ...vi Downloaded from Elcodis com electronic components distributor...
Page 463: ...Downloaded from Elcodis com electronic components distributor...
Page 465: ...Downloaded from Elcodis com electronic components distributor...
