manualshive.com logo in svg

Omron NT21 Series, Reference Manual

Share
Download
Omron NT21 Series Reference Manual Download Page 120

•

If switches A, B, and C come ON at the same time,
touch switch D will also come ON due to the touch
switch mechanism.

•

If switches A, B, and D come ON at the same time,
touch switch C will also come ON due to the touch
switch mechanism.

A

C

B

D

Smallest touch switch frame

2-7

Section

Touch Switches

111

Caution

If touch switches are pressed in rapid succession, their inputs may not be suc-
cessfully received.
Confirm that the input of a touch switch has been successfully received before
moving on to the next operation.

Reference:

Caution on pressing three touch switches

When multiple touch switches are arranged as shown in the example below and
the three are pressed at the same time, a malfunction will occur due to a pecu-
liarity of the touch switch mechanism.

Be careful how you arrange touch switches.

Example: When touch switches are created at positions A and B and at one of

the points of intersection C or D

Functions That Can Be Set for Touch Switches

Any of the following functions can be set for touch switches. For details, refer to
Processing Functions (page 119).

Host Notification Function

When a touch switch is pressed, the status of a bit for notification purposes at the
host (the notify bit) changes.

It may change in any of the four following ways.

Momentary

The notify bit is set to 1 (ON) only while the touch switch is pressed, and returns
to 0 (OFF) when the touch switch is released.

Alternate

Each time the touch switch is pressed, the notify bit is switched to 1 (ON) if cur-
rently set to 0 (OFF), and to 0 (OFF) if currently set to 1 (ON).

Set

When the touch switch is pressed the notify bit is set to 1 (ON).

Reset

When the touch switch is pressed the notify bit is set to 0 (OFF).

PC

1

1(ON)

PT

Bit allocated for notification
(touch switch 1)

Touch switch 1

Screen Switching Function

When a touch switch is pressed, the display switches to the set screen.

Screen number 5 is set for touch switch 1.

To next screen

When touch switch 1
is pressed

Screen number 5

Downloaded from 

Elcodis.com

 

electronic components distributor

 

Summary of Contents for NT21 Series



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands