manualshive.com logo in svg

Omron NT21 Series, Reference Manual

Share
Download
Omron NT21 Series Reference Manual Download Page 410

5-1

Section

Examples of Actual Applications of Direct Access

401

•

Touch switches for logging:
Check marks set for all

•

Touch switches for display function:
Check marks set for all

Regardless of whether or not the trend graph is displayed, reading of the
contents of the word starts at the same time as PT operation is started.

START

OPERATION

Due to the background function, data reading is started at
the same time as operation is started.

↓

When the trend graph screen is displayed, the latest status is displayed.

The latest trend graph is displayed on the basis of collected
data.

↓

Even if another screen is displayed during data collection, the contents of
the word continue being read by the background function.

Other screen

Data collected while
the other screen was
displayed.

↓

If required, past status changes can be displayed as a trend graph.

Old

Part being displayed

New

Previous Page
(Rewind) touch
switch

Next Page
(Forward)
touch switch

Suggestions

•

Apart from the Previous Page (Rewind) and Next Page (Forward) touch
switches indicated above, the following touch switches can be created without
restriction to control the display and data recording (

2-10-4 Trend Graphs,

page 161).

Downloaded from 

Elcodis.com

 

electronic components distributor

 

Summary of Contents for NT21 Series



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands