Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 355 / 594

8-2 Section Library Editor
339
clipboard. After clicking the Button in confirmation dialog box, li-
brary data will be pasted to the selected code.
Quitting the library table
You can quit the library table in any of the two ways described below.
Clicking the Button of the library table dialog.
Clicking the Button at the upper right corner of the library table dialog.
8-2-2 Creating Library Data Using Library Editor
Registering new library data
(1) Select [Library Editor] from the [Tools] menu.
The library table is displayed.
(2) Click the Button.
The New Library Entry dialog box is displayed.
(3) Set the code, size, colors, compression, comment of the library data to be
newly created, then click the Button.
Setting for New Library Entry dialog box
Code: Specify the code to which the new library data is regis-
tered.