Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 292 / 594

7-1 Section Common Operation
276
Operation procedure (Copy To Next)
The “copy to next” function copies the data at the specified address of a memory
table to the next address after adding the specified amount to the existing data.
The procedure for specifying the incremental amount is explained in 7-1-5 Copy
Increment Setting Operation .
(1) Click on the table entry number of the copy source table.
(2) Click on or right click the table entry number.
(3) Select [Copy To Next].
7-1-5 Copy Increment Setting Operation
To set the incremental amount used for the “copy to next” operation, follow the
steps described below.
Copy Increment Setting dialog box
Value – Increment By
Specify the incremental amount for the initial value data in a numeral memory
table entry.
The amount set here is valid only for the numeral memory table.
Value – Input Type
Specify whether the incremental amount is specified in decimal or hexadecimal.
The specified item is identified by the indication of a radio button.
The setting is valid only for the numeral memory table.
Address – Increment By
Specify the incremental amount for table addresses.
Address – Format
Specify whether the incremental amount is specified in decimal or hexadecimal.
The specified item is identified by the indication of a radio button.
Operation procedure
(1) Click on .
(2) Specify the incremental amount to be added to the initial value in the numer-
al memory table at [Value] – [Increment By].
(3) Specify whether the notation of the incremental amount set above is decimal
or hexadecimal at [Value] – [Input Type].
(4) Specify the table address incremental amount at [Address] – [Increment By]
(5) Specify whether the notation of the incremental amount set above is decimal
or hexadecimal at [Value] – [Input Type].