Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 71 / 594

3-3 Section Operation of Screen Data (Application) File
55
The dialog box for the applicable folder, file name, and files of type exist appears
to specify them.
NTST Application (*.onw)
After specifying the folder, file name, and file type click on the [Open] button.
The application manager of the read out screen data is displayed.
With NT-series Support Tool for Windows, following screen data files can be han-
dled.
onw
mmi
For details, refer to File Types in page 56
Reference: S Recent used files will be shown at the bottom of [File] menu. Recent four files
can be opened from this command.
S NT-series Support Tool for Windows (Ver. 4.7) can read the screen data that is
created using an earlier version of NT-series Support Tool.
S It is not possible to read screen data created by NT-series Support Tool for Win-
dows (Ver. 4.7) with an earlier version of NT-series Support Tool.
S With MMI files, the screen data created by the Support Tool Ver.4 can be read
using Support Tool Ver.3.
j as long as the PT model is supported with Ver.3. j .
(With MMI format, user group and grid information will be lost.)
e.g.
NT30C MMI file created with Ver.4. j
Can be read with Ver.3
NT31C-V2 MMI file created with Ver.4.
j
Cannot be read with Ver.3
3-3-3 Saving the Screen Data (Application) File
After creating the screen data, save it to a file.
The procedure for saving the screen data to a file is: [File] (main window menu)
→ [Save], or [File] (main window menu) → [Save As].
Save:
The existing screen data of the opened file is overwritten by the new screen
data.