Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 147 / 594

6-1 Section Common Operation
131
Character Bit Word Area Type
E5 EM Bank 5 (CS/CJ–series PLCs) 1 1
E6 EM Bank 6 (CS/CJ–series PLCs) 1 1
E7 EM Bank 7 (CS/CJ–series PLCs) 1 1
E8 EM Bank 8 (CS/CJ–series PLCs) 1 1
E9 EM Bank 9 (CS/CJ–series PLCs)
1 1
EA EM Bank A (CS/CJ–series PLCs) 1 1
EB EM Bank B (CS/CJ–series PLCs) 1 1
EC EM Bank C (CS/CJ–series PLCs) 1 1
CU Count Up Flag (CS/CJ–series PLCs) 1
TU Time Up Flag (CS/CJ–series PLCs)
1
W Work Area (CS/CJ–series PLCs) 1 1
TK Task Flag (CS/CJ–series PLCs) 1
* EM Bank D, EM Bank E, EM Bank F are not available since these are reserved
words.
1
Only available for the NT20/NT21 and the NT31/631-V2 and above models.
: Specification possible : Specification not possible
With NT11S/NT11, NT20S, NT30, NT30C, NT600S, NT620S, NT620C and
NT625C:
Input a word address as a 4-digit number (leading zeros can be suppressed) and
a bit number as a 2-digit number.
With NT20, NT21, NT31, NT31C, NT631 and NT631C:
Input a word address as a 5-digit number (leading zeros can be suppressed) and
a bit number as a 2-digit number.
PLC Vendor: MEMLINK
Possible areas and characters that indicate area types are as follows:
Character Area Type Word Bit
None Memory Link Area
: Specification possible : Specification not possible
Input a word address as a 4-digit number (leading zeros can be suppressed) and
a bit number as a 2-digit number.
PLC Vendor: Mitsubishi_A
Possible areas and characters that indicate area types are as follows:
Character Area Type Word Bit
X Input Relay
Y Output Relay
M Internal Relay
L Latch Relay
B Link Relay
C Counter
T Timer