manualshive.com logo in svg

Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Share
Download
Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4 Operation Manual Download Page 266

6-9

Section

Graphs

250

<With data logging function but without background function>

Trend graph screen

Switching

the screen

Other screen

Returning

Trend graph screen

(starts drawing a

graph newly)

Data logged

Data not logged during this period

Previous data are re-displayed by pressing        (page return

)

Data logged

The trend graph is drawn newly when the screen is switched back to the trend
graph display screen. However, it is possible to redisplay the past data drawn in
the trend graph previously by pressing a touch switch that has the function to dis-
play the past data. In this case, however, the data are not logged while a trend
graph is not displayed.

<With logging and background functions>

Trend graph screen

Switching

the screen

Other screen

Returning

Trend graph screen

Data is always logged

Past data are re-displayed continuously by pressing        (page return)

Although the trend graph starts displaying new data when the screen is
switched back to the trend graph display screen, it is possible to display the
data of the period during which the trend graph was not displayed by pressing a
touch switch that has the function to display the past data.

The trend graph element can control data sampling, display and other related
operations using the special touch switches shown below.

These touch switches execute their function only once when they are pressed.

 Stop touch switch

Stops data sampling. Updating of a trend graph display is also stopped at the
same time.
While sampling is halted, the touch switch is lit.

If data sampling is executed by the background function, data sampling in the
background mode is also halted.

When the background function is not used, if the screen is switched back to the
trend graph display screen after halting data sampling and calling other screen,
the trend graph is redisplayed and logging restarts automatically.

 Restart (Continue) touch switch

Restarts halted data sampling. At the same time, updating of the trend graph dis-
play restarts.

Summary of Contents for NT-SERIES - SUPPORT TOOL FOR WINDOWS V4



















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands