Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 450 / 594

11-3 Section
Sending (Downloading) the Data
434
Data Type Description
System Memory
*1
The setting contents of “System” of “PT Config-
uration” are sent and set at the PT.
Table
*2
NT20, NT20S and NT600S:
The following data is sent in a batch.
Numeral memory table data
Character string memory table (String table)
data
Mark data
NT21, NT31, NT31C, NT631, and NT631C:
The following data can be sent individually.
Numeral memory table
Character string memory table (String table)
Bit memory table
Mark data
Image data
Library data
Recipe table
*1: With the NT21, NT31, NT31C, NT631 and NT631C, individual transmission
of system memory is restricted as follows:
The following data stored in a PT cannot be overwritten.
Number of numeral table entries
Number of string table entries
Number of bit memory table entries
Screen history setting
Alarm history setting
Numeral storage type
The following data can be overwritten.
Initial screen number
Screen data comment
*2: You cannot transmit the mathematical table separately. The mathematical
table will be transmitted only when application transmission is performed.
Reference: When data is sent from the Support Tool to a PT, the existing data in the PT is
lost. Therefore, make sure that the existing data in the PT is backed up by the
Support Tool before executing data transmission from the Support Tool to the
PT.
With the Support Tool on CD-ROM, NT Transfer Utility that is exclusively used
for downloading/uploading the screen data is supplied (For details, refer to
Ap-
pendix C ).
Operation procedure
(1) Select [Connect] (menu bar) → [Download (NT-series Support Tool → PT)].