Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 511 / 594

Appendix C NT Transfer Utility
495
(4) Input “a:\setup” in the input field in the specified window.
For the drive, specify the drive containing the CD-ROM. For example, if the
CD-ROM is in drive E, enter ”e:\setup”. To use a floppy disk, click the
and specify the SETUP.EXE file that was copied from the NT
Transfer Utility folder to the floppy disk.
(5) Click on .
The installation started.
(6) When the setup screen of the NT Transfer Utility is displayed, click on
.
The screen for specifying the destination of program installation is dis-
played.
(7) Specify the directory for installation.
In the initial state, the directory shown below is set as the destination directo-
ry.
C: \Program Files\Omron\Ntst4.8E\Transfer Utility
If you want to change the directory, click on
and input the drive and
directory. (If a directory that does not exist in the hard disk is specified, the
directory is automatically made.)
After specifying the destination, click on .
The screen for specifying the destination for registering the start menu is dis-
played.