Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 247 / 594

6-9 Section Graphs
231
Operation Procedure
Selection using the menu bar: [Objects]
→
[Graph]
→
[Analogue Meter]
Selection using the drawing toolbar:
Terminology
Display %
Foreground Color
+Range
–Range
Scale
Frame
Property setting
General
Position: Indicates the display position of an analogue meter.
(The reference point is at the upper left corner of the analogue me-
ter. It changes depending on the other settings.)
Size:
Center Point: Indicates the center point of an arc or a circle of the analogue me-
ter.
(It is not affected by other settings.)
Radius: Indicates the meter radius of an analogue meter.
(It is not affected by other settings.)
Frame: Specify whether or not a frame is displayed for a meter of an
analogue meter. When the frame display is ON, select the frame
color. (Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Display Sign: Specify whether or not a display area for negative value is dis-
played.
Direction: Specify the positive direction of an analogue meter.
Clockwise, Anti-Clockwise
Meter Shape
Shape: Specify the shape of an analogue meter.
Quarter, Semi-Circle, Circle
Direction: Specify the display direction of an analogue meter.
Right (
→ ), Left ( ← ), Up ( ↑ ), Down ( ↓ )
Type: Specify the display type of an analogue meter.
Needle, Fill
Width Rate: Specify the meter width of an analogue meter in % format re-
garding the radius as 100%.
10 to 100 (by 1%)