Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 436 / 594

10-1 Section Quick Reference
420
Item Operation Refer to
Image To modify the size of an
image data
(1) Specify the area of an image data to be shrunk or ex-
panded on the image editor.
(2) Drag one of the green handles ( ) displayed on the
range specifying frame to modify the size of an image
data.
8-1
Label To display a label in multi-
ple lines
[Objects]–[Lamp] or [Touch switch]
Create a lamp or a touch switch for which
Static or On Off
Static is set as the label type.
(NT21, NT31/631-V2 and above)
6-5, 6-8
To change the contents
and the position of a label
according to the ON/OFF
status of the lamp bit
(1) [Objects] → [Lamp] or [Touch Switch]
Create a lamp or a touch switch for which On Off
Static is set as the label type
(2) Turn the PC (PLC) bit to which the lamp is allocated
ON/OFF.
DEF
Screen
PT
ABC
PC (PLC)
Bit
If OFF
Lamp or touch switch with On Off static label
If ON
(Only for NT21, NT31/631-V2 and above)
6-5, 6-8
To change the contents of
a label according to the
values in PLC memory
[Objects]–[Lamp] or [Touch switch]
Create a lamp or a touch switch for which
Numeral Display
is set as the label type.
(Only for NT21, NT31/631-V2 and above)
6-5, 6-8
[Objects]–[Lamp] or [Touch switch]
Create a lamp or a touch switch for which
String Display is
set as the label type.
(Only for NT21, NT31/631-V2 and above)
6-5, 6-8
To insert image data and
library data into a string
with NT21, NT31/631-V2
and above
[Tool] → [PT Configuration]
Enable NT20/30/620 Compatible Mode .
(The range of image/library data is as the same as
NT30/620 series in NT20/30/620 Compatible Mode.)
3-3,
APPENDIX A
Lamp To centralize the lamp la-
bel
Specify the lamp to be centralized and select [Draw] →
[Centralize Label]
6-1-9