Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 412 / 594

9-3 Section Creating the Sample Data
396
Creating the alarm list
(5) Select [Objects] (menu bar) → [Alarm] → [List]. (Refer to 6-3-1 Alarm List .)
(6) Click the mouse with the mouse cursor set at the position where the alarm
list is to be displayed (at the intended upper left corner).
(7) Make the following settings in the dialog box for selecting whether or not
the line scroll touch switches and page scroll touch switches are used.
Create Line Scroll Touch Switch
Create Page Scroll Touch Switch
Reference: For NT21, NT31, NT31C, NT631, and NT631C, this dialog box is not displayed.
For these models, create the alarm list and then set whether or not the line/page
scroll touch switches are created in the property settings.
(8) Set the properties as shown below.
General Position ––
Size ––
Message Length 32
Display Line Qty 8
Scale 1 2 (High)
Smoothing
Color Frame White
Back-
ground
ON White
ground OFF
Black
Image & Library Display ImageLib
Color Foreground White
Background Black
Settings List Settings Start Bit Table Entry 0
No. of Bits Referenced 8
(9) Adjust the display position of the alarm list by dragging it.
After that, click on any position in the screen other than the alarm list to cancel the
alarm list selected state (edit state).
Changing the frame of the line scroll (down) touch switch
(10) Specify the switch at the bottom in the touch switches at the right side of
the alarm list and adjust its size and position (move it to the lowest line in
the alarm list).
(11) Double click the line scroll (down) touch switch and set the properties as
shown below.