Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 106 / 594

5-2 Section Standard Screen
90
An extended I/O input setting dialog box is displayed.
(4) Set [Switch Screen] for [Function] and the screen number of the screen to be
displayed for [Screen No.].
5-1-6 Saving the Screen Image
The Support Tool provides a function to save the displayed screen image in a bit
map file as it is.
The grid display status and Show Tag can be also saved.
The following describes the procedure for saving the screen image.
(1) Select the screen that is going to be saved in a file so that it can be edited.
(2) Select [Screen] in the menu bar, then select [Copy to Image].
A dialog box is displayed to set a file name.
(3) Set the folder and file name, then click on .
The screen image is saved to the specified file.
5-2 Standard Screen
A standard screen is the base screen for the display at a PT.
Screen numbers of standard screens differ depending on the PT model. The
table below shows the screen numbers that can be used for a standard screen.