Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 248 / 594

6-9 Section Graphs
232
Scale Display
Scale: Specify whether or not a scale is displayed for an analogue me-
ter.
Distance: Specify the scale position in % format regarding the radius as
100%.
0 to 150 (by 1%)
Scale Length: Specify the scale length in % format regarding the radius as
100%.
10 to 110 (by 1%)
No. of Division: Specify the number of the division that the scale should be di-
vided in the range from 0 to 100%.
1 to 20
Scale Color: Specify the scale color of an analogue meter.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Color
Foreground: Specify the color for displaying the present value.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Background: Specify the background color of the circumscribed rectangle of an
analogue meter. (Can only be set for PTs with color display.)
Transparent, white, black, blue, red, magenta, green, cyan, yellow
+Range: Specify the color of analogue meter displayed for a positive value.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green cyan, yellow
–Range: Specify the color of analogue meter displayed for a negative value.
(Can only be set for PTs with color display.)
White, black, blue, red, magenta, green, cyan, yellow
Settings
Value
Table Entry: Specify the table entry number of a numeral memory table entry to
be displayed.
Display %: Specify whether or not a percent value is displayed on the screen.
100%
Table Entry: Specify this item if a 100% value is set by a numeral memory table
entry; set the table entry number of the numeral table.
Value: Specify this item if a 100% value is set by a constant; set the value
to be taken for a 100% value.
0%
Table Entry: Specify this item is a 0% value is set by a numeral memory table
entry; set the table entry number of the numeral table.
Value: Specify this item if a 0% value is set by a constant; set the value to
be taken for a 0% value.
–100%
Table Entry: Specify this item if a –100% value is set by a numeral memory table
entry; set the table entry number of the numeral table.