Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 309 / 594

7-5 Section Extended I/O Input Table
293
(1) Specify the image/library code field where the code is set.
(2) Click on .
(3) Specify the library data from the list.
(4) Click on .
The code of the specified library data is displayed in the image/library code
field.
[Insert Library]
button
[OK] button
7-5 Extended I/O Input Table
The extended I/O input table is used to set functions at the input terminals of an
extended I/O unit or allocate PC (PLC) bits to be referred to.
Extended I/O units can be used only with NT30 and NT30C.
The following functions can be set at extended I/O unit input terminals.
Screen switching
Screen 1
Screen 2
PT
External input
Extended I/O input table
Screen switching
2 Screen No.
When the input terminal goes ON, the screen is switched to the set screen.
If 0 is set, the display returns to the previous screen.
Notify bit
Notify bit
PC (PLC)
address
:
0000002
PT
External input
PC (PLC)
Extended I/O input table
The extended I/O input table notifies the PC (PLC) of the status (ON/OFF) of the
input terminals.