Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 393 / 594

9-3 Section Creating the Sample Data
377
(4) Adjust the position of “Image Lamp” character string on the data creation
screen by dragging it.
Setting the image/library lamp
(5) Select [Objects] (menu bar)
→ [Lamp] → [Image].
(6) Click the mouse with the mouse cursor set at the position where the
image/library lamp is to be displayed (at the intended upper left corner).
(7) Set a check mark in the check box of the [Code] for OFF, in General, and
click on .
(8) In the image table, specify “FE20” and click on .
(9) Set a check mark in the check box of the [Code] for ON, in General, and
click on .
(10) In the image table, specify “FE21” and click on .
(11) Set the lamp function properties as shown below.
Light
Functions
Address PC (PLC) Bit Address L0000005
Functions
I/O Comment Image Lamp
(12) Adjust the display position of the image/library lamp.
Reference: With the NT21, NT31, NT31C, NT631, and NT631C, codes assigned to image
data are from 0001 to 0FFF. However, if NT20/30/620-compatible mode is used
with the NT21, NT31, NT31C, NT631, and NT631C, the image code will be the
same as NT30, NT30C, NT620S, NT620C and NT625C.
Creating [Bar Graph 1] and [Bar Graph 2]
Creating the title
(1) Select [Objects] (menu bar)
→ [Fixed Display] → [Text].
(2) Click the mouse with the mouse cursor set at the position where the char-
acter string of [Bar Graph 1] is to be displayed (at the intended upper left
corner of bar graph).
(3) Set the properties as shown below.
Description Bar Graph 1
Position ––
Font Type Standard
Scale 1 2 (High)
Smoothing
Attribute Standard
Color Foreground White
Background Black