Omron NT-SERIES - SUPPORT TOOL FOR WINDOWS V4, Operation Manual

Page: 143 / 594

6-1 Section Common Operation
127
1 2 (High): A numeric value is displayed with doubled height and original
width.
2 1 (Wide): A number is displayed at the original height and doubled width.
2 2: A numeric value is displayed with doubled height and width.
3 3: A numeric value is displayed with threefold height and width.
4 4: A numeric value is displayed with fourfold height and width.
8 8: A numeric value is displayed with eightfold height and width
(not possible for NT20/NT20S).
1 1 1 2 2 1 2 2 3 3 4 4 8 8
Reference: With the NT21 and with the NT31, NT31C, NT631, and NT631C “-V1” and above,
numbers of 2 2 or larger scale are automatically displayed in 32 dot font.
Smoothing
Smoothing processing allows jags to be smoothed when a number is displayed
in an enlarged scale.
Selection of this item is possible, for numbers of 2 2 or larger.
Smoothing cannot be selected for NT20, NT20S and NT600S since smoothing
processing is always executed for numbers larger than 2
2 with these models.
Without smoothing With smoothing
Attribute
This is an attribute to determine how a numeric value is displayed. Attributes to
be displayed here vary somewhat according to the PT model.
Standard: The numeric value is displayed in the specified color and spe-
cified background color.
Inverse: The numeric value and background are displayed in colors that
are the reverse of the specified colors.
Flash: The numeric value flashes when displayed. If this attribute is
selected, standard display and no display (background color
only) are alternated.
Inverse Flash: The numeric value is displayed by alternating standard display
and inverse display.